background image

GB

10

Never use any cleansers, abrasive
substances or solvents. These
could damage the device.

b) Cleaning accessories

Wash all the accessories that can
come in contact with food, ...

- by hand only,

the accessories

are not dishwasher safe.

- with hot water and a household

cleaning liquid suitable for food-
stuff surfaces

Caution:

The cross blade and the

shredder attachments are very
sharp!

Dry all parts thoroughly,

before

reusing the appliance.

9. Storage

Wind the 

mains cable

under 

the

bottom part of the appliance

. In

this way, it is protected from dam-
age.

Store the discs in the small recess
(Fig. D) on top of the machine. 

Store the appliance in 

a dry place.

After drying the metal attachments
rub them lightly with a little cooking
oil, if you are not going to use the
device immediately. This will pro-
tect them

from corrosion.

Keep the machine 

away

from chil-

dren and elderly people. They may
not always be able to assess
potential dangers of the heating
elements of such devices.

10. Disposal

Tip:

Care for the environment. 

If you wish to dispose of the device,
dispose of it at a collection site for
recycling of electronics.

Make the appliance unusable by
removing the plug before disposing of
the appliance, in order to prevent acci-
dents caused by children playing with
the appliance.

Ensure that sharp parts (cross blade,
shredder attachments) are removed to
protect children.

11. Warranty and service

The warranty conditions and service
centre address can be found in the
enclosed warranty slip.

Содержание KH 3460













Отзывы: