Bifinett KH 1191, Руководство по эксплуатации

Страница: 8 / 12

- 6 -
Assembling motif discs
When the pusher and container
are assembled:
1. Select the desire motif disc
.
2. Place the motif disc into the lock
ring .
3. Place the lock ring with the motif
disc onto the container .
4. Turn the lock ring in the direction
of the arrow until it engages .
Assembling the nozzles
When the pusher and container
are assembled:
1. Place the nozzle adaptor
into the
lock ring . The thread must point
outwards.
2. Place the lock ring with the nozzle
adaptor onto the container .
3. Turn the lock ring in the direction
of the arrow until it engages .
4. Select a nozzle .
5. Place the nozzle on the nozzle
adapter .
6. Screw the adapter lock over the
nozzle on the nozzle adapter .
7. Adjust the lock device on the nozzle
adaptor to "CLOSE".
Filling the container
The pastry to be processed must be
at room temperature. If it is too soft,
place it in the refrigerator for a
short time.
1. Turn the container so that the
arrow points to the open lock .
2. Remove the container from the
motor unit . Leave the threaded rod
with the pusher in the motor
unit .
Tip: If need be, moisten the inner
surface of the container with
water before filling it with pastry.
Doing so helps avoid having the
pastry stick to the inner surfaces of
the container
.
3. Shape the pastry / decorating mixture
to a roll. This permits easier filling. Fill
the container
with this pastry roll.
Note: Fill the container at the
most to the MAX marking. Process
the pastry straight away.
4. Place the container onto the motor
unit as described in the chapter
"Assembling the container".
5. Insert the power plug into a wall
socket.
The Biscuit Shaper is now ready for use.
KH1191
IB_KH1191_EN.qxd 21.08.2007 17:01 Uhr Seite 6