Bien Air Lubricare 2 HIM-2, Инструкция по эксплуатации

Страница: 36 / 52

34
8.3.4 Nozzle Skirt
Turn the power off. Pull out the nozzle skirt and replace it with a new
one. Make sure it is oriented the right way up, as shown in the illustra-
tion.
8.3.5 Coupling O-rings
8.3.6 Spray Cans
1. Remove the old O-rings with a pair of tweezers or another such
tool.
2. Set the new O-rings according to coupling grooves.
Replace the can when the corresponding Empty Spray Can Lamp
starts to blink.
p. 17 “6.2.2 Spray Cans”
Pull Out
Insert
Nozzle Skirt
Empty Spray Can Lamp
O-rings Set
* Use only O-rings that have been designed specifically for use with
the coupling.