17
2. Hold the spray can with your hand and raise the lock lever in the
counterclockwise direction.
Check that the spray can is not loose vertically.
* If it is loose, readjust it.
p. 18
“6.2.3 Spray Stand Adjustment”
• If a spray can is tilted or is otherwise not set correctly, oil might spray out into your eyes.
Lock Lever
Never use any cleaning sprays for air bearing handpieces. Doing so will damage the
Lubricare 2 and handpieces.
Make sure the lock levers are all the way up. Otherwise, improper connection results in
not supplying oil. (The corresponding Empty Spray Can Lamp will light up.)
• Do not press the tip of the spray valve stem with anything other than the inlet port. Other-
wise, oil might spray out into your eyes.
█
Setting
Inlet Port
1. Open the rear cover (R), and then insert the tip of the spray
valve stem into the inlet port.
Aerosol Actuator
Cap
* Remove the cap and aerosol actuator from the spray can.
