19
Lubricare 2
Couplings
Lubricare
Couplings
6.3 Couplings
•
For handpieces from other manufacturers, use the optional couplings designed specifi
-
cally for the Lubricare 2 or genuine couplings of your dental treatment unit.
• Do not use couplings made for other manufacturers’ maintenance devices. Doing so
could result in releasing oil mist or poor handpiece maintenance.
█
Attaching
Push the coupling against the connector with one hand, and loosen
the connection nut with the other hand in the arrow direction shown in
the illustration.
1. Open the front door and check that mode setting and coupling type
are matched. Set the coupling’s thick pipe to the right side and in-
sert the coupling into the connector.
p. 10
2. Push the coupling against the connector with one hand, and pull
down the connection nut with the other hand and tighten it in the ar-
row direction shown in the illustration.
Give a little jiggle to the coupling and check that it is securely con-
nected.
Connection Nut
Connection Nut
Do not tighten the connection nut with pliers or other tools. This will damage the coupling.
* If you cannot tighten the connection nut smoothly, loosen it and try again.
* Tighten the connecting nut firmly by hand. Otherwise, oil and air will leak and the mainte
-
nance will not be properly performed.
█
Removing
Couplings for the Lubricare cannot be used for the Lubricare 2.
Right
Right
Wrong
Wrong
