REF 2100202-0001/ENG
4/4
This product may be covered by one or more of the following patents:
EP Europe
: 745358 / 688539 / 948294 / 1145688 / 1563800 / 1563801 / 1675523 / 1753360
DE Germany
: 29616023.7
DK Denmark
: 9600315
FR France
: 2722972
CH Switzerland
: 693922 CN China: 100528099 / 100522100 / 100522099 /
100553584
JP Japan
: 3892485 / 4298933 / 7000419
US United-States
: 5453008 / 6033220 / 6319003 / 7214060 / 7448870
RU Russia
: 2361540 / 2361541 / 2372046
REF 1600696-001 BOARD DMX2 Plus / REF 1600666-001 BOARD DMX2 Pro
REF
Legend
1600696-001 Set DMX2 Plus
1600666-001 Set DMX2 Pro
1501393-001 Electronic DMX2 Plus
1501384-001 Electronic DMX2 Pro
1302410-001 Upper cover
1302411-001 Lower cover
1500554-001 Dual Motor Switch
1500579-001 Cable RS-232. L = 30 cm.
1501418-001 Analogue input cable. L = 30 cm.
1500580-001 Converter 24/32 Vdc and 24 Vdc
249.39.11-001 Exhaust air
1600677-001 Micromotor MX2, with internal
spray and LED
1600700-001 MX2-400 hose, grey silicone, with
rotating connector (± 200°).
Length 1.7 m
In these instructions, “Device” corresponds to the
product described in the heading “Type”. For
example, turbine, contra-angle, handpiece, micro-
motor, tube, electronics, connectors, station etc.
List of Bien-Air Dental SA registered trade
mark products ®:
Symbols
Recyclable electrical and electronic material.
Aquilon
®
Bora
®
Boralina
®
ChiroPro
®
Diamline
®
Eolia
®
Gyro
®
Gyrolina
®
Isolite
®
Lubrifluid
®
Lubrimed
®
MX
®
PowerCare
®
Prestilina
®
Spraynet
®
Manufacturer.
Bien-Air Dental SA
Länggasse 60
Case postale
2500 Bienne 6, Switzerland
Tel. +41 (0)32 344 64 64
Fax +41 (0)32 344 64 91
[email protected]
Bien-Air
Deutschland GmbH
Jechtinger Strasse 11
79111 Freiburg, Deutschland
Tel. +49 (0)761 45 57 40
Fax +49 (0)761 47 47 28
[email protected]
Bien-Air España, SA
Entença, 169 Bajos
08029 Barcelona, España
Tel. +34 934 25 30 40
Fax +34 934 23 98 60
[email protected]
Bien-Air USA, Inc.
Medical Technologies
5 Corporate Park
Suite 160
Irvine, CA 92606 USA
Phone 1-800-433-BIEN
Phone 949-477-6050
Fax
949-477-6051
Bien-Air France Sàrl
55-57, avenue Jean Lolive
93508 Pantin Cedex, France
Tel. +33 (0)1 41 83 60 70
Fax +33 (0)1 48 96 07 40
[email protected]
Bien-Air Italia s.r.l.
Via Vaina 3
20122 Milano, Italia
Tel. +39 (02) 58 32 12 51/52/54
Fax +39 (02) 58 32 12 53
[email protected]
Bien-Air UK Ltd
Arundel House
Unit 1 - Ground Floor
Amberley Court, Whitworth Road
Crawley, West Sussex,
RH11 7XL, England
Tel44 (0)1293 550200
Fax: +44 (0)1293 520481
[email protected]
Bien-Air Asia Ltd.
Nishi-Ikebukuro
Daiichi-Seimei Bldg. 10F
2-40-12 Ikebukuro, Toshimaku
Tokyo, 171-0014, Japan
Tel. +81 (3) 5954-7661
Fax +81 (3) 5954-7660
[email protected]
Beijing Bien-Air
Medical Instrument
Technology Service Co. Ltd.
Room 907, The Exchange Beijing,
No 118 Jian Guo Lu Yi,
Chao Yang District,
Beijing 100022, China
Tel. +86 10 6567 0651
Fax +86 10 6567 8047
[email protected]
Set supplied
Optional accessories
REF 1302411
REF 1302410
REF 1501393 DMX2 Plus
REF 1501384 DMX2 Pro
Set DMX2 Plus
REF 1600696-001
Set DMX2 Pro
REF 1600666-001
REF 1500580-001
REF 1500554-001
REF 1500579-001
REF 1600677-001
REF 1600700-001
L = 1.7 m
L = 30 cm.
REF 1501418-001
L = 30 cm.
0120
CE Marking with number of the notified body.
Recommended separation distances between portable and mobile RF communications equipment and the DMX2 Plus/DMX2 Pro
The DMX2 Plus/DMX2 Pro is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of
the DMX2 Plus/DMX2 Pro can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the DMX2 Plus/DMX2 Pro as recommended below, according to the maximum output power of the communications equipment.
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in metres (m) can be estimated using the equation
applicable to the frequency of the transmitter, where
P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Rated maximum output power of
the transmitter
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
0.12
0.38
1.2
3.8
12
W
0.01
0.1
1
10
100
80 MHz to 800 MHz
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
0.23
0.73
2.3
7.3
23
Light.
