Bien Air CA 1: 2.5L MS, Инструкция по эксплуатации, Страница: 10 / 20

6.2 Cleaning
Preparation
1. Disconnect the device from the coup-
ling and remove the bur ( FIG. 3 step
1).
Clean under running water
FIG. 4 step 1
1. Clean under runing water at <38°C.
Remove dirt / deposits
FIG. 4 step 2
1. Carefully remove all traces of dirt or
deposits from the nozzles using the
Bien-Air cleaning wire.
2. Dry the nozzles with compressed air
then dry the rest of the instrument
with a cloth.
CAUTION
Do not immerse in an ultrasonic
cleaner.
Internal cleaning with aquacare
1. Shake the Aquacare before use.
2. Use the Aquacare attachment (see
FIG. 5 step 1).
3. Keep the tip of the instrument point-
ing down and protect with an
absorbent cloth; press the Aquacare
button down for 2 seconds (see
FIG. 5 step 2).
4. Use the Aquacare attachment (see
FIG. 5 step 3).
5. Keep the tip of the instrument point-
ing down and protect with an
absorbent cloth; press the Aquacare
button down for 1 second (see
FIG. 5
step 4).
10
1
2
FIG. 4
1
2
4
3
FIG. 5