Bien Air 1700544-001, Инструкция по эксплуатации

Страница: 23 / 84

ENG
18
NOTES
1 The iPod touch® must be correctly connected to a Wi-Fi net-
work before the App Store is opened; refer to Apple's user guide
for appropriate use of the iPod touch®.
2 In order to conform to the IEC 60601-1-2 standards, take into
account the different routes of the wires through the system
(bend, fold, section etc.) (see chapter “4.1 iOptima system over-
view” on page 10 and only use the power supply provided with the
iOptima. In order to maintain warranty, this unit must be installed
with the greatest care. Follow all the necessary instructions. Pro-
tect the unit from direct sunlight and dust. Keep the original pac-
kaging for storage and shipment.
3 The equipment is powered by your mains power supply (100-
240 VAC).
FIG. 5 FIG. 6 FIG. 7
1 2
1 2
1
3
2
4
FIG. 5
E. Connect the MX2 cable (2) to the MX2 micromotor (1), by guiding
the connector and plug with the index pin on the connector and
tighten (CW).
⚠
CAUTION
Never connect a handpiece on a running micromotor.
FIG. 6
F. Connect the 4-way hose (1) to the 4-way connector of the iOptima
unit (2):
• First guide the sleeve and carefully and firmly insert the
hose sleeve, by matching the connector and the coupling;
• Tighten (CW).
FIG. 7
G. Switch ON the water and power supply of the dental unit (refer to
your dental unit instructions).
H. Switch ON the iOptima (1) (« I » = ON).

The led (4) turns green (power ON).
I. Once it has been switched ON, connect the interface device «iPod
touch®» (2) to the iOptima carefully sliding it along the lightning
adapter (3).

The iOptima is ready for use.
See chapter “6 Interface overview” on page 19.