Biegler autopress Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 19

Biegler autopress Скачать руководство пользователя страница 4

4

1. WARNINGS AND SAFETY INSTRUCTIONS



In the event of any suspected malfunction while in operation, the device should

be immediately removed from service.



Unplugging the mains plug is the only safe way to disconnect from the mains

power supply.



The device may only be fastened to infusion stands, tripods or equipment rails

which have sufficient stability and load capacity to support the device.



Only pressure infusion bags specified by BIEGLER or approved by BIEGLER

for use with this device may be used in conjunction with the autopress.



The device must only be used in areas in which the electrical installations are in

accordance with the standards and regulations in force.



The device must not be used in rooms with potential explosion hazard.



The device must not be immersed in liquids or sterilized with steam or by

thermochemical methods.



All extraneous influences such as electromagnetic waves or high temperatures

are to be kept to a minimum.



Avoid exerting force on the device or its accessories.



If the device is dropped, damaged due to force, or functions in a way other than

described in the operating instructions, stop using the device immediately and
return it to the service centre.



Periodic technical safety inspections must be carried out as described in the

"Periodic inspections" section.



Persons and services authorized by BIEGLER must carry out repairs and

modifications on the device.



No mechanical or electrical changes may be made to the components of the

device.

«
...
2
3
4
5
6
...
»

Содержание autopress




















Отзывы:

Нет отзывов