DF M
ANUAL
I
NSTALLATION
Manual version 3.0 (21-11-2017)
en-27
en
2.7.2 Attaching discharge section
Only for recessed models (Type R):
1. Make a hole in the ceiling for the discharge.
Discharge section hole dimensions
2. Attach the two angle sections
1
to the unit along the dis-
charge openings’ edges using the screws supplied.
3. Extend the telescopic discharge grille
2
into the unit’s dis-
charge opening until it reaches the required height.
4. Attach the discharge duct to the angle sections
1
using
the screws supplied.
Let op:
c
For the unit to work properly, it is essential that
there are sufficient openings in the alcove or ceiling
for air to enter the unit.
B
C
SIZE
TYPE
DIMENSIONS
a
R
90 mm
b
100-R
970 mm
150-R
1470 mm
200-R
1970 mm
250-R
2470 mm
