CC-EC M
ANUAL
I
NSTALLATION
Manual version 1.0 (16
-
07
-
2020)
en-19
en
2.10 Mounting the cover
1. Remove the air inlet grille by turning it anticlockwise (bay
-
onet catch).
2. Fit the supplied screws
3
and anti-loss rings
4
into the
cover.
3. Mount the cover into the unit:
- Hook the cover into the unit using the metal lips;
- Tighten the screws in the indicated order.
Caution:
c
Ensure that the projection
6
of the unit falls into
the recess
7
of the cover. The cover fits to the unit
in only one way.
4. Put back the air inlet grille.
2.11 Adjusting the discharge pattern
The discharge pattern can be adjusted to the room using the
supplied blind plates.
1
.
Caution:
c
If use is made of the air connection for an adjoining
room, the two blind plates must be mounted in the
two holes on the side of this connection
2
.
Caution:
c
Do not mount more than two blind plates per unit.
