Bicker UPS-1000-B1, Руководство пользователя

Страница: 11 / 32

UPS-1000-B1
Revision 1
11
1. Improper use and opening of the device will void the warranty/guarantee.
2. The device may only be used as intended.
3. The national accident prevention and safety regulations must be observed.
4. The assembly of the device and the electrical installation have to be state of the art.
5. The electrical, thermal and mechanical limit values have to be observed.
6. The UPS wiring specifications - as described in this manual - have to be followed.
7. After the initial installation to the AC power supply, the battery begins to charge.
It takes about 8 hours to fully charge.
8. To minimize battery damage, the UPS has to be charged before storage and recharged every 6 months.
9. The UPS must not be used as an inverter for any purpose other than that for which it was intended.
10. The UPS is not designed for medical or life support systems.
11. No laser printer or tube monitor may be connected to the UPS.
12. Safe handling of batteries, see page 29.
ATTENTION!