32
English
User’s Manual IUPS-401-Series
Status display and Alarm
Status display
Alarm
Alarm sound
LED
detachable
Normal UPS mode
–
green
Battery charge (mains mode)
–
green flashing
UPS battery mode
2 beep sounds every 3 seconds
yes
red flashing
UPS battery mode (Battery low)
4 beep sounds a second
no
red flashing (quickly)
Overload (Normal mode)
Continuous sound
no
red
Internal UPS failure
8 beep sounds per 2 sec.,
no
red flashing (quickly)
2 sec. stillness
Overtemperature
8 beep sounds per 2 sec.,
yes
red flashing (quickly)
2 sec. stillness
Battery defect
–
red flashing (quickly)
Model overview IUPS-401/-B1/-B4/-B5/-B9/-BA/-BB/-BC
Article
Interface
Load sensor
UPS management software
No.
switch off
IUPS-401
USB
≤33 W*
IUPS-401-B5
USB
≤20 W*
IUPS-401-BB
USB
≤8 W*
IUPS-401-BC
USB
≤0 W*
Reboot function
If mains voltage returns after a power failure while Windows® is already shutting down, the UPS switches the
PC off (after the shut-down period) and switches it on again after app. 30 sec…5 minutes depending on the
battery capacity (the higher the capacity, the shorter the restart time). This latency is required to ensure suffi-
cient energy for a secure shutdown in case of a new power failure.
Observe BIOS settings of mainboard.
UPSilon 2000 and internal USB cable inclu-
ded in delivery (Windows® 7, 8, 10, Server
2012). External USB cable 2.0, A-/B-plug / 500
mm included in delivery.
Article
Interface
Load sensor
UPS management software
No.
switch off
IUPS-401-B1
SERIAL (D-SUB)
≤33 W*
IUPS-401-B4
SERIAL (D-SUB)
≤20 W*
IUPS-401-BA
SERIAL (D-SUB)
≤8 W*
IUPS-401-B9
SERIAL (D-SUB)
≤0 W*
Reboot function
RUPS 2000 OEM, UPS management software
(Windows® 7, 8, 10, Server 2008/2010/2012)
and 9-pole interface cable included in
delivery.
If mains voltage returns after a power failure while Windows® is already shutting down, the UPS switches the
PC off (after the shut-down period) and switches it on again after approximately 5 seconds in conjunction
with RUPS 2000 and an ACPI-PC.
Observe BIOS settings of mainboard.
* Tolerance of switch-off threshold ≤3 %
For futher information please visit our website www.bicker.de and refer to the article number.
