Page 4 of 4 MC227 / MC228x1 Controller. Energy regulator replacement. M8161 Issue 1.2.
8. Fasten the case assembly together taking care not to trap any wires.
9. Replace the control knob by aligning the knob to the Energy Controller shaft and gently
pushing on.
10.
Prior to further use, the Responsible Body shall check the electrical safety of the unit.
Only if all safety requirements are met can the unit be used again.
For help and Support please contact:
Bibby Scientific Limited.
Beacon Road,
Stone,
Staffordshire ST15 0SA,
Great Britain.
Tel: +44(0)1785 812121
Fax: +44(0)1785 810405
General enquiries :
Order enquiries :
Technical support :
electrothermalhelp@bibby-
scientific.com
Part of the Bibby Scientific Group
2016 Bibby Scientific Limited. All rights reserved.
