EN
16
Operating
Panda
Manual Mode
Manual Mode
Rotate the position indicator of the jog dial to stop position. Now turn the jog dial to the right to select the manual mode in
the speed level 1 to start. The motor will start immediately in level 1. You can change the speed between the level 1 to 10
during operation.
Exit manual mode by pressing the
Pulse ON / OFF button
, the motor will stop immediately and the indicator light flashes red.
To continue with further preperation, you turn the jog dial in the stop position and then select the desired speed level again
or one of the preset programs.
You can also exit manual mode by rotating the jog dial to the left to the stop position. Please note, you can also turn the
blender on and off during manual mode, using the
Pulse ON / OFF button.
Pulse Mode
By pressing and holding the pulse button the blender operates at the highest speed level. Stop the Pulse mode by releasing
the pulse button. The Jog Dial must be in the stop position to operate. During the Pulse mode, the status light is solid white.
Remove the mixing container only when the blades do not rotate anymore!
