A:
9300 S.W. Gemini Drive Beaverton, OR 97008 USA
T:
+1 503.641.7287
W:
www.biamp.com
MAY 2019
1. Ventilation Fan Cover
The amplifier has a perforated cover to allow cool air
into the chassis. Two variable speed, temperature-
controlled fans allow air to circulate through the unit
from front to back.
2. Front Control Panel
The amplifier front panel displays information about
the amplifier status as well as allowing numerous
functions for configuration and operation.
The front panel may be locked or unlocked by
pressing and holding any two single-channel mute
buttons simultaneously for two seconds. The front
panel may also be locked in software, but doing so
will disable the ability to unlock the control directly
from the front panel.
3. Per-Channel Mute Buttons
Each audio output channel may be muted
individually. A red LED will indicate when a channel
is muted. Holding any mute button for two seconds
will activate or deactivate the mute-all function.
Amplifier Front Panel
4. LED Status Indicators
Per-channel and overall system status is indicated
by multi-colored LEDs on the front panel. Table 1
gives information about the status LED indications
and table 2 gives information about the per-channel
LEDs.
5. Locate
Pressing the locate button will play an audible signal
that cycles through each connected output. Device
status LEDs will flash green when locate is initiated.
6. Mute All
Pressing the mute all button will mute all audio on
the amplifier.
7. Power Status
The amplifier has two power states that may be
enabled or disabled from the front panel: Operating
and Sleep. In sleep mode the amplifier will not be
discoverable nor will it respond to network traffic.
Unconfigured devices will not enter sleep mode.
