TCM-1 & TCM-1A FRONT PANEL
Figure 1 TCM-1A
Figure 2 TCM-1
1.
AVB/Control
Facilitates connection to the Tesira AVB network for audio transmission and control. This RJ-45 port may either
be connected directly to the Tesira AVB port (via a PoE+ injector) for a single device system, or via a PoE+
network switch in a multi-device AVB system. The TCM-1 is an IEEE 802.3 Type 1 Class 3 PoE device requiring
15.4W of PoE power. The TCM-1A is an IEEE 802.3 Type 2 Class 4 device requiring 30W of PoE+ power. There
are no other provisions for power inlet.
2.
Mic (IN)
Allows up to two additional TCM-1EX expander microphone units in a daisy-chain topology. Use of this RJ-45 port
is optional and will depend on the number of additional microphones required to cover the acoustic space.
3.
Power LED
A multi-color LED provides information about the status of the device.
Status
LED Indicator
No power
Off
Booting / Self-Test
Red Solid
Ready to receive configuration or updating firmware
Yellow Solid
Configured and ready to participate in the system
Green Solid
Unit is in Locate mode (triggered from the software)
Green Flashing
Unit has Major Alarm condition
Red Flashing
Unit has Minor Alarm condition
Yellow Flashing
Unit has both a Major and Minor Alarm condition
Red & Yellow Flashing
