page 2
Installation and Operation Guide
Devio SCX
Devio SCX Installation
The SCX may be installed in almost any location that is convenient for the
room design, requirements, etc. This includes installation on a wall behind
a typical conference room display or under a table. Be sure to allow for
adequate airflow on the ventilation grilles.
Install away from heat sources such as vents, radiators, heat registers
and stoves. Also avoid installing near water or steam. Do not exceed the
maximum ambient operating temperature of 32-104° F (0-40° C).
Optional Wall-Mount Bracket
A wall-mount bracket comes installed on the device and may easily be
removed.
The following hardware is included for mounting the SCX with the attached
bracket:
• Screws (x4)
• Drywall Anchors (x4)
1. Determine the location where the Devio SCX is to be installed.
2.
Position the SCX for optimal airflow as shown in
Figure 3.
3. Install SCX with attached bracket at the desired location. Shown in
Figure 4.
4. Use the included zip ties to secure the power supply and cables as
required. Shown in Figure 4.
Figure 3 - Proper Airflow
Figure 4 - Devio SCX Wall Installation
with Cable Management Tray
Figure 1 - Devio SCX with Bracket
Remove the four screws that secure the
mounting bracket to the SCX as shown
in Figure 2 if required.
Figure 2 - Bracket Removal
