L SERIES LVH-900
Installation and Operation Guide
page 7
Front Splay
10° hole set
Back Splay
0° hole set
Back Splay
20° hole set
Figure 4.
Typical splay bracket orientation - cabinet connection locations are symmetrical on the splay bracket
Figure 3.
Attach the side plate to the next cabinet - keep all connections loose until all bolts are started.
Support the second cabinet until all connections are made and tightened
Lower cabinet lifted into place
Cabinets face-down on protected surface
3
4
3. With the appropriate M10 screws removed, move the
second cabinet into position behind the first and attach
the splay bracket.
4. Thread bolts into all splay bracket connections before
tightening them. (Figure 3)
5. Fully tighten all splay bracket connections on both
sides of the cabinet.
INSTALLATION
(continued)
3
4
M10 Hex Bolt
M10 Flat Washer
M10 Hex Bolt
M10 Flat
Washer
