I SERIES IV6-LAU Instructions
Page 5
IV6-LAU APPLICATIONS
1.
Under-balcony mount for a two to
three element IV6 array. The LAU
provides a very low profile mechanism
for rigidly mounting a small array to a
solid overhead surface. The built-in 0°,
5°, 10°, and 15° aiming options allow
adjustments to the overall array aiming
angle.
2.
Suspend an array of up to three (3)
IV6-1122 elements from one or more
load-rated eyebolt(s) or other similar
sized load-rated lifting hardware. For
this application, the IV6-LAU must be
bolted to the IV6-LAF in the 0° position.
3.
Suspend I SERIES 600 or I SERIES
800 subwoofers behind an array of up
to three (3) IV6-1122 elements using
the BalancePoint™ Flyware SBR54
(54" long Sub Behind Fly Rails). For
this application, the IV6-LAU must be
bolted to the IV6-LAF in the 0° position.
4.
Suspend an array of up to three
(3) IV6-1122 elements using the
BalancePoint™ Flyware IAF55 (55"
wide Isometric Array Frame). The IAF55
allows flying a central IV6-1122 array
with additional I SERIES fill speakers to
the left and right. The IAF55 may also
be combined with the SBR54. For this
application, the IV6-LAU must be bolted
to the IV6-LAF-PBB in the 0° position.
IMPORTANT:
No more than three (3) cabinets should be mounted to the
IV6-LAF-PBB when using the IV6-LAU as the upper mounting point.
WARNING:
For safety reasons, the center of mass of the array MUST be
located directly beneath the IV6-LAF-PBB Array Frame. If the center of
mass is located behind the array frame, it may result in an unsafe rigging
condition. To verify center of mass is directly beneath the Array Frame, build the
intended array (using the IV6-LAF-PBB Array Frame) in EASE® Focus 3 (EF3)
and verify the center of mass position meets this condition as displayed the
"Rigging" pane. (See image at right from EF3).
VERY IMPORTANT:
The IV6-LAU can only be used with IV6-LAF-PBB pin
positions 3-9 due to the frame structure. Always have rigging safety conditions
verified by a certified engineer before installation. Failure to do so can lead to
severe injury or even death!
1
2
3
4
I SERIES BalancePoint™ Flyware instructions are available by following this link
to the Biamp website:
and finding BalancePoint™ Flyware.
