VOICECRAFTER
TM
USER CONTROL INTERFACE
9
Config Memory
Store: Brings up the Store menu for
storing Voicecrafter parameters. When
STORE CONFIG? is displayed, select
appropriate memory location for settings
to be stored (F1~F5). When F1 has a
configuration stored, the unit will recall
F1 settings upon power up. Only
Configuration Train settings will be
saved (manual adjustments to Mic Gain
and Speaker Gain will not be saved).
Recall: Brings up the Recall menu for
recalling stored configuration presets
(locations F1~F5).
Erase: Brings up the Erase menu for
erasing stored configuration presets
(locations F1~F5).
Measurements
DSP AVE: Displays calculated average
levels from the DSP (EC_So, NLP_So,
Codec In, EC_Si, EC_Ri, VCR IN,
AERL, and ERLE). Each time the DSP
AVE button is pressed, a current
average will be displayed.
SEND Mon: Displays current send
speech level as calculated by
autoadaption.
RCV Mon: Displays current receive
speech levels as calculated by
autoadaption.
Noise: Displays current status of the
internal white noise generator. Noise
can be turned on/off using F2
or F3
.
5.3.3 NETWORK SCREEN
The NETWORK screen (see
Figure 5-3)
is used to adjust the Voicecrafter
interface to external devices, such as
Codec, VCR, or phone line.
Figure 5-3. Network Screen
Codec Port
Input Offset: The Input Offset Gain can
be raised or lowered using F2
and
F3
. The CODEC/4-wire #1 Input
Offset defaults to a factory preset gain
of 0dB, and should be compatible with
most external equipment or network
interface levels. Input Offset Gain can
be adjusted in cases where an atypical
external interface level is required.
