BHM-Tech Apollon, Инструкция по эксплуатации

Страница: 13 / 20

13
Instr
uctions for use
Microphone mode
Switching to the
“M”
position, the input signal from
the internal microphone is used to receive acoustic
signals.
Telecoil mode
Switching to the
“T”
position, the input signal from
the internal Telecoil is used to receive inductive
signals. The „T“ -mode can be used in official
buildings, cinemas, theatres, equipped with inductive-
system or at home with inductive-accessories. It
enables you to listen without disturbance.
Microphone-telecoil mode
Switching to the “MT” mode you are in the combined
telecoil-microphone mode.
You can hear signals from the integrated microphone
and from the integrated telecoil at the same time. This
mode is useful in schools, and also in buildings
equipped with inductive-system.
Switching OFF
To turn OFF the aid move the switch
(2)
to position
“O”
.
DAI (Direct Audio Input)
The
apollon
is equipped with a DAI
(6)
which is
placed on top of the aid beside the microphone port.
It enables you to use hearing aid accessories like
blue-tooth link to your cell-phone, table microphone and
so on. Consult your acoustician about the possibilities.
HINT: TO ENSURE SAFETY AND FUNCTIONALITY OF
THE HEARING SYSTEM USE ONLY EXTERNAL
DEVICES APPROVED BY AUTHORIZED HEARING AID
MANUFACTURER OR BHM-TECH.
THE USE OF UNAUTHORIZED DEVICES MAY BE
HAZARDOUS TO YOUR HEALTH.
Line-In 3,5mm
apollon
is equipped with an external audio input
(7)
.
Hint: Before put on an external device on the external
audio input, make sure that the volume control is on
position1!