9
4. Mounting of the contact mini
onto the wearing systems
The electronic housing, as well as the bone
conduction receiver housing, are equipped
with snap fasteners which enable you the
use of the different wearing systems like
headbands, hairband…
WARNING:
If using the hearing system for
babys or small children, because of the weak
skull, you may have to change the position of
the wearing system periodically.
Your acoustician or ent will instruct you.
Select the most pleasant volume by means
of the volume control. The volume will be
“higher“, when you turn the volume trimmer
clockwise by using the screwdriver.
The volume will be “lower” when you move
the volume control trimmer counter-clock-
wise.
Please note:
Special care must be taken to ensure that the
system is properly seated on the head and
the conductor plate of the bone conduction
receiver is firmly seated against the head.
Ensure that the contact is directly in contact
with the skin.
• Hairs between conductor plate and skin will
reduce the transmission of the signals.
• Weak contact and too high volume can
cause feed back (whistling).
