Page 22
NEDSP1062-KBD Operating Manual
4.
Operation.
To listen to the demonstration modes, or change the
number of DSP levels it is necessary to put the module
into the set up mode.
To do this, ensure the module is Off. Press and hold the
DSP level button. Turn on the module and a 2 tone
beep will be heard indicating that the module is in the
set up mode.
Releasing the button after the first 2 tone beep will enter
demonstration mode 1.
Releasing after the second 2 tone beep will enter
demonstration mode 2.
Keeping the button depressed with change the number
of levels available. 4 beeps will indicate 4 level mode
and 8 beeps 8 levels. Release the button when the
desired level is reached.
The module will return to normal operation after this.
The colour of the LED will indicate the mode of operation.
DSP mode
4 Levels
8 Levels
OFF
RED
ORANGE
ON
GREEN
GREEN
Table 3. LED mode indication.
