GSF2818KL
Owner’s Manual
9
Step 7 (Doors assembly)
a) Insert the bottom pin of left door (K)
into the pre-drilled hole on the cart
bottom panel.
b) Push down the top pin of left door
and insert it into the pre-drilled
hole on the left end of cart front
beam.
c) Repeat the procedure for the right
door (L) assembly.
d) Close the two doors.
Step 8 (Assemble the body to the cart)
a) Put the body assembly (D) on the top of cart
assembly.
b) Align the two holes on the top of cart right side
panel with the two holes on the right of body
assembly.
c) Insert one bolt (AA) with one spring washer
(CC) and one flat washer (BB) into each
pre-drilled hole.
d) Tighten bolts by hand until secure.
e) Repeat the procedure for the left end
assembly.
f) Go back and tighten all bolts using the
screwdriver provided.
Attention:
Unpack the regulator/hose
assembly (located underneath the
firebox) prior to assembling the grill body
to the cart, and pull out the
regulator/hose to the cart side panel
when go ahead to this step.
Step 9 (Assemble the side bar tool hanger to the side shelves)
a) Turn over the left side shelf (C).
b) String four hooks (B) with the side bar tool hanger (A), then
align the holes on the end of side bar tool hanger (A) with the
holes on the left side shelf (C).
c) Insert one bolt (AA), one spring washer (CC) and one flat
washer (BB) into each pre-drilled hole. Tighten bolts by hand
until secured.
a) Go back and tighten all bolts using the screwdriver provided.
b) Repeat the procedure for the assembly of right side shelf (R)
and side bar tool hanger.
D
