BH AEROLIGHT 7.5, Руководство пользователя

Страница: 8 / 18

A E R O L I G H T 2 0 2 3 BH 8
A E R O L I G H T
A L L M O D E L S
h1 h2 L1 L2 a1 a2
Stack Reach
XS
555 110 510 410 71.25º 74.5º 510.45 368.44
SM
570 120 525 410 72.25º 74º 523.43 374.91
MD
587 135 542 410 72.75º 73.5º 538.94 382.36
LA
605 150 559 410 73º 73º 554.12 389.59
XL
627 175 575 410 73º 73º 576.03 398.89
XXL
656 200 595 415 73.5º 73º 601.75 408.15
05 S I Z E S A N D D I M E N S I O N S
0 3 W A R N I N G S O N U S E
04 WA R N I N G S O N U S E
M A X I M U M T Y R E S I Z E
If you install a tyre of a different size on your bicycle, check and make sure that there are at least 6 mm between the
tyre and other parts of the frame and fork.
M A X I M U M F O R K L E N G T H (A X L E-TO-C R O W N)
Observe the maximum length between the fork axle and the lower part of the steering tube (axle-to-crown). If this
maximum length is not observed, the frame could be damaged due to withstanding a greater load than that for which
it was designed and may cause serious accidents.
P O S I T I O N O F T H E S P I N D L E I N S I D E T H E F O R K T U B E
No steering spacers must be fitted above the stem. Otherwise, the materials could be damaged due to withstanding
a greater load than that for which they were designed and may cause serious accidents.
M I N I M U M A N D M A X I M U M I N S E RT I O N L E N G T H O F T H E S E AT P O S T
Failure to observe the maximum and minimum seat post insertion dimensions indicated in this manual may cause
a lever effect on the frame. The pressure exerted could damage the frame and cause serious accidents. The warranty
does not cover the damage generated by failing to observe these indications.
M A X I M U M N U M B E R O F S T E E R I N G S PA C E R S
This manual specifies the maximum number of steering spacers that can be fitted under the stem. If this maximum
quantity is not observed, the materials could be damaged due to withstanding a greater load than that for which they
were designed and may cause serious accidents.
I N T E N D E D U S E
Each bicycle has been designed to achieve a specific intended use. The models described in this manual have the
following intended use:
This is a set of conditions for the operation of the bicycle that provides for its use on asphalt roads. In addition, the
wheels must be kept in contact with the running surface at all times.