10
2. Weight Mode
1) Place the weight unit platform on a level, slip-proof floor.
2) When the display unit is on the CLOCK mode, press the MODE key to enter the weight mode.
The display unit shows“WT+HELO+8888”,and then“WT+ HELO+‘----’Kg”. The display unit is ready
for receiving the data from the weight unit.
3) Tip on the middle of the glass platform using one foot. The lamp of weight platform emits the red
light. When the lamp of weight platform emits the green light and the display unit shows “WT+
HELO+‘0.0’Kg”.
You can press the Unit key to change the weight unit: kg
➔
lb
➔
st.
The scale is ready for weight measurement.
4) Now carefully mount the platform of scale. Stand as still as possible until the weight reading is
shown on the display.
5) After reading your weight, please leave the scale. The display will return to zero. If no operation,
the display unit will automatically return to the Clock mode after a few seconds.
3. Input the personal data
1) Before you use body analysis function, please input your personal data., When the display unit is
on the Clock mode, press the MODE key twice to enter the Analysis mode. The display unit shows
“WT-FT…”.
2) Press the Set key to enter the personal data setting. The data include Person Position, gender, age
and height. Press the
▲
key or the
▼
key to adjust it, and then press the “SET” key to confirm it.
3) After completing programming, the display unit will return to the analysis mode. You can start to
measure. Or if you want to program other storage locations with data of different persons, please re-
peat the programming process according to the instructions above.
4. Analysis Mode
1) Place the weight platform on a level, slip-proof floor.
2) In the Clock mode, press the MODE key twice to enter the analysis mode. The display unit shows
‘WT-FAT’+‘P1’+‘----’+‘---’”. It means the display unit is ready for receiving the data from the
weight unit.
3) Press the P/
▲
key to start to access the storage location containing your personal data. Press the
▲
key or the
▼
key to select it, and then press the “SET” key to confirm it.
4) Tip on the middle of the glass platform using one foot. A soft whistling tone sounds and the lamp
of weight platform emits the red light. When the lamp of weight platform emits the green light and
the display unit shows”0.0”.
5) Use two hands to hold the display unit and the finger of hand contact with the metal electrode.
Now carefully mount the glass platform of the scale. Stand as still as possible until the reading is
shown on the display.
OpERATION INSTRUCTION AND GUARANTEE
INfRARED MUlTIfUNCTION BODY SCAlE
