RS5 RECUMBENT CYCLE
CONSOLE (cont’d)
24
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.
BHFitnessUSA
.com • Phone 949-206-0330 • Fax 949-206-0013
RS5
1-5 Manual Mode
User may preset their own resistance level from1 to 16 by pressing UP/DOWN button.
The default resistance is level 1. Press MODE to confirm setting.
The first LED segment starts blinking and switches to the next according to the preset time
(divided into 16 segments). Once the preset target data counting down to 0, the monitor will
stop automatically. User may press START button to start training again. Other preset data
will keep counting down from previous data.
DISTANCE: when blinking, user may press
to set up target distance
(+) or (-) buttons
TIME : when blinking, user may press
to set up target training time from
(+) or (-) buttons
00:00 to 99:00.
Press MODE to confirm setting.
from 0.00 to 99.50
.
Press MODE to confirm setting.
CALORIES when blinking, user may press
:
(+) or (-) buttons to set up target calories
from 0 to 350. Press MODE to confirm setting
Press START button to start training
:
PULSE: the monitor will detect user’s heart rate. Please hold on to the handgrip sensors
or wear chest belt during exercise
.
This message will disappear after the failure is corrected.
NOTE:
1. The
monitor will shut off if the training is stopped or none of the buttons is
display
pressed after 90 seconds.
2. Error message:
E2
When the monitor displays this information, the control board connection failed.
