17
9. DISMOUNTING AND DISCARDING AN
OBSOLETE MACHINE
Technical data
Unit of
measurement
WK 700 Z
Classic
Max. log diameter
mm
approx. 240
Blade diameter
mm
700/30
Weight
kg
144
Max. number of PTO
shaft revolutions
RPM
540
Size and dimensions
(with opened
log carriage)
Length
mm
1220
Width
mm
865
Height
mm
1100
10. TECHICAL DATA
10.1 Noise emissions
The noise level was measured in compliance with the general rules for
establishment of noise and acoustic pollution of garden and agricultu-
ral equipment on work sites as well as with other national standards
for noise measurement. The applicable measuring parameters were:
Measurement on the machine front edge at 1600 mm height
and 400mm away from the blade on the right hand side, while proces-
sing round beech wood in the size of 80+/-5% of the admissible tim-
ber diameter as per this instruction book.
Detected noise levels:
No load
91 db(A)
Max load 105 db(A)
Hearing protection is mandatory!
The above mentioned values are emission measurements and may not be
therefore assumed as for a safe work environment. Although there is a relati-
onship between noise emission and immission levels, this is no sufficient basis
to determine the extent of on-site required protection. There are a lot of other
factors that can influence site work and risk of injuries and namely: the actual si-
te/buildings configuration, the concomitant presence of other noise sources (for
instance other machines performing other works in the neighbourhood) etc...
The factors applied for determining safety of a workplace may al-
so very from one country to the other. We are reporting here the noi-
se values detected in the facility of the manufacturer on order to allow
the user performing a better evaluation of the possible risk/disturbance.
