SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
SAFETY INSTRUCTIONS
•
Keep children and unauthorized persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
This device is not intended to use by individuals with restricted physical, sensory or metal
capacities or those with lack of experience or knowledge, include children, unless they are
supervised by an individual who is responsible for their safety or have received training in
operating the device.
•
Do not run the cleaner continuously for more than 30 minutes at a time, as doing so can
damage the internal components.
•
Do not operate the unit without fluid in the tank. Always ensure the fluid is no higher than the
max. mark, always ensure there is a minimum depth.
•
Do not drop any Item into the tank as this may cause damage to the transducer. Always place
the items gently into the tank.
•
The more items that you place in your cleaning bath the less efficient it will clean. It is not
advised to overlap items. Always allow plenty of clear space between the items.
•
Do keep the lid on during use. This will prevent splashes and reduce evaporation of the fluid.
•
Never immerse the machine or power cord in water or other liquid.
•
Do not touch the power plug with wet hands, especially when inserting or removing the plug.
•
Do not touch the unit if the machine has fallen into water during operation. Remove the power
plug from the socket first.
•
Do not disassemble the machine, except by professionals.
•
Unplug the power source while filling or emptying the tank.
•
Do not spray water or liquid over the device and the control panel
•
Do not operate the cleaner without proper grounding.
•
Do not place the device on a soft surface, where the vents could be blocked.
•
Upon completion of the cleaning cycle, isolate the machine from the electrical supply.
•
Take care when adding items to the cleaning tank, displaced fluid can damage the internal
components. Any displaced fluid must be dried up immediately.
•
In the event of failure/emergency, disconnect the mains supply by removing the plug from the
mains socket.
PREPARATION
1. Carefully unpack the cleaner and remove all traces of packing materials from it. Visually inspect
the cleaner for any parts that may have become loose or damaged during transit. Check if the
package contents the main machine, the lid, the power lead and the manual.
2. Place the cleaner on a flat, clean surface where the cleaner will receive adequate ventilation and
ensure all controls are set to off.
3. Ensure the power lead is securely plugged into the cleaner and that no part of the lead is likely to
come into contact with moisture.
4. Carefully fill the tank. For demanding cleaning we recommend a small amount of washing up
liquid, this will help increase the cleaning performance. The cleaner is now ready for use.
COMPONENTS
1
Indicator for ready to work
2
LED screen
3
Ultrasonic indicator
4
Time button
5
On/Off button
6
DEGAS button
