BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Step 4 - Load Tank Housing onto Post
•
Load tank housing onto post.
•
Slide the tank housing down.
Step 5 - Attach Reflector Studs to Burner
•
Insert 3 reflector studs &
•
3 large flat washers.
•
Tighten studs securely.
Required parts:
Reflector stud 3 pcs.
Large flat washer 3 pcs.
Step 6 - Attach Hose to Burner and Attach Burner to Post
•
Screw off 4 bolts.
•
Load burner by inserting hose into post.
•
Insert burner into post.
•
Control knob should be above decal on
post.
•
Attach burner to post and loosely install
four bolts.
•
Tighten bolts securely.
Required parts:
Bolt 4 pcs.
Attach hose to burner
