BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
USE
Spread the clutch aligning tool by turning the knurled screw
clockwise. The clutch aligning tool must be seated free of
clearance in the clutch hub and must be easily moved axially.
Install the clutch disc with clutch pressure plate.
Tighten slightly the mounting bolts from clutch pressure plate.
Clutch disc must be able to move radially.
Push the clutch aligning tool further toward the engine.
The cone (at front of clutch aligning tool) will be pressed into the
crankshaft bore and centered the clutch disc. At the same time
turn the knurled screw clockwise for fixing the clutch aligning
tool in the clutch hub.
Press the clutch aligning tool with clutch disc toward the engine
and evenly tighten the mounting screws of clutch pressure plate
succession. Tighten the screws at the end with the specified
torque.
Solve clutch aligning tool by turning the knurled screw
counterclockwise and remove the clutch aligning tool.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally.
NOTE
