BGS technic 9445, Инструкция по эксплуатации

Страница: 5 / 6

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
3. Open the relief valve to fully recess piston,
then close tightly
4. Grasp the handle and rotate the hydraulic
cylinder clockwise until it stops.
5. Place the OP0 adapter onto the adapter
seat on the end of the piston.
6. Begin squeezing the lever and continue
until the edge of the adapter meets the die.
7. Open the relief valve to fully recess piston,
then close tightly and remove the OP0
adapter.
8. Securely fasten die by turning tightening
bar clockwise.
Relief valve
Handle
Lever
Hydraulic
cylinder
Adaptor Finish position
Adaptor seat
Relief valve
Tightening bar