SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8716
Tool for Longitudinal Control Arm Rubber Bushings
CONTENT
1.
Spindle nut with bearing
2.
Thrust piece for demounting
3.
Retaining sleeve
4.
Spindle
5.
Retaining plate
6.
Mounting ring
7.
Clamping tool
GENERAL INFORMATION
This set allows for easy and damage-free mounting of the rubber bushings with less expenditure of
time involved, as there is no more demounting of the axle part.
SAFETY INSTRUCTIONS
Make sure general local safety instructions are observed on using the tool.
These operating instructions provide general information on tools. Always use vehicle-specific
service literature alongside, which will contain relevant data, repair instructions and special
warnings.
Do not use the tool whenever parts of it are damaged.
Use this tool for the types of work for which it is designed only.
Never place the tool on top of the vehicle battery. Danger of short circuit.
Always wear appropriate clothing during work to avoid the risk of snagging. Do not wear jewellery
and tie up long hair.
Keep children and other unauthorised persons clear of the area of operation.
On using the tool, always wear safety goggles and protective gloves.
USE
DEMOUNTING MOUNTING
Pretension the bushing by means of the tool (7)
prior to applying.
1
2 3 4
5
6 7
5 3 Axle part 2 1 4
5 3 Axle part 6 2 1
7
Rubber bushing
