SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
Art. 63220
USB-ENDOSCOPE
SAFETY INSTRUCTIONS
Never use the endoscope after it has been damaged. All usage of this tool in educational institutes,
schools, semi-professional or self-help shops must be supervised responsibly by trained personnel.
Regulations of the Industrial Employer's Liability Insurance Association for the prevention of industrial
accidents with electric applications and equipment must be followed whenever working with the tool in
industrial facilities. The assembly of the tool equates to protection category III. The USB voltage-
supply measures by dropping the tool or exposing it to a strong mechanical pressure may damage it.
DESIGNATED USE
The tool's flexible swan neck and the camera head are suitable in an optimal way for the immersion
into liquids (no acids or bases) up to a maximum depth of 66 cm. The handle nevertheless, must
never be exposed to moisture. Any usage of the tool on humans and animals or in explosive areas is
strictly forbidden. The voltage-supply is carried out through the USB interface. The endoscope was
designed for optical trouble-shootings and inspections of dead-voltage constructions and installations.
It can be connected with any computer or notebook via USB. Its flexible swan neck allows the
placement of the colour-camera head in narrow and hard to reach positions. Two white LEDs in the
camera head allow you to take pictures and record videos even in pitch-black surroundings. Any
undesignated usage of the tool is strictly forbidden. Furthermore, you must not modify or rebuild the
tool. Modifications can lead to serious damages on the tool and may also lead to short circuits, fire or
fatal accidents such as electric shocks. Not the manufacturer, but the operator is responsible for all
personal injuries or property damages, caused by an undesignated use of the tool. Please keep in
mind that operating and connecting errors are not subject to the manufacturer's jurisdiction.
Therefore, the manufacturer cannot cover any damages that result from those errors.
