- 2 -
Bio-Feuer-Technik
Inhaber
Ausstellung
Verwaltung
Kontakt
Herbert Bee
54411 Hermeskeil
54296 Trier-Petrisberg
fon
06503/953377
Ust-IdNr. DE 149 819 155
Bahnhofstraße 18
Max-Planck-Str. 8
fax
06503/981694
Bank Voba Hochwald
BlZ 585 647 88
Konto 2000 24096
mobil
0171/ 770 82 98
Please note:
Never fill in more than 2 fingerbreadths under the upper edge of the burning chamber.
Shut the drawer carefully so that the bio alcohol can not be spilled !
The fuel should never be stored above room temperature. When you start your stove, it
is possible that you have a little deflagration of the fuel. Please do not be concerned about
it, this is not dangerous for you because of the construction of the chamber. The cooler
the temperature at which you store the fuel, the less deflagration there will be.
Lighting the biological fuel (bio-alcohol)
Move the push-on- rosette to the right side .(counter clockwise rotation )
Take a lighter and move it in the opening which appears after moving the push-on -rosette
Please use a lighter that has a minimum 10cm long lighting stick and simply light the
fuel/alcohol in the burning chamber.
Please note:
Be careful when lighting, it is important that the lighter has no physical contact with the
fuel, but that just the flame extends to the fuel. There should be distance of about 2-3cm
from the lighter to the fuel.
To avoid explosions due to the usage of improper lighters, we advice you to use only the
BFT lighter enclosed in your equipment.
Adjustment / consumption
With the control unit for opening and closing the chamber, you are also able to control and
adjust the size of the flame and consumption of fuel.
Please note:
When starting your stove, the burning chamber must be opened completely (control unit) to
allow maximum oxygen in the chamber. After 20 min. you can adjust the control to create the
flame size of your choice. Depending on the Model of your stove, the consumption of the
stove lies between 0,2 and 0,4 liters per hour.
When you adjust the burning chamber, please note that the fire should always burn with a
yellow flame. Please avoid blue flames as they are excessively hot.
Drowning the fire / re-filling
If you would like to put out the fire please close the burning chamber completely with the
control unit.
