Page 1
Additional Instructions for Firebeam products
**Installation must be carried out by a qualified and competent person**
Electrical connection
The fire can be connected directly to a 13 amp fused switched spur or plugged into a mains
socket which can be sited on the
right hand side of the fire. It is imperative that the power supply
is capable of handling a load
of 2000 watts (2kw). This appliance must be earthed. Do not use
an extension lead.
The Beam LED lighting will
require an additional mains supply. This can be wired directly into the
mains supply with a 3 amp fused switched spur or plugged into a mains socket.
Ensure that both of the plug socket-outlet connections for this appliance are accessible for easy
electrical isolation in the event of servicing and replacing components etc.
Always ensure that all electrical work complies with the relevant Building Regulations
and the Electrical Code of Practice. All electrical work should be carried out by a
qualified electrician.
Choosing a suitable location
This electric fire is designed to be fitted within an existing brick / masonry chimney breast or
within a false studded chimney breast. The base of the fire opening must be solid, level and firmly
fixed to safely support the weight of the fire.
If the product is installed into an existing brick / masonry chimney breast it must be dry with the
chimney capped off using a suitable chimney cap.
The appliance must be kept away from any
source of damp or moist conditions.
Important Notice: To reduce heat losses and to prevent any chimney up draught
affecting the operation of your fire we recommend that the chimney is blocked off.
The chimney breast, wall or fireplace must be of sound construction and all fixings used must
be suitable for the type of wall. If there is any doubt regarding the suitability of the installation
site please contact your supplier.
From the front of the fire ensure that there is a minimum clearance of 50mm between any
non-combustible materials. For combustible material clearances please consult with the
manufacturer.
This appliance MUST NOT be located immediately below an electrical socket-outlet.
