BFDX BF-5208UHF, Руководство пользователя

Страница: 6 / 12

Page 6 of 12
PREPARATION
INSTALLING/ UNPACKING THE BATTERY PACK
Note: Because the battery pack is provided uncharged, you must charge the battery
pack before using it with the transceiver. To charge the battery pack, refer To
CHARGING THE BATTERY PACK.
Position the two grooves on the edge and two hooks at
the bottom of the battery over the corresponding guides
on the back of the transceiver.
Slide the battery pack along the back of the transceiver
until the release latch on the top of the transceiver
locks the battery pack in place.
To remove the battery pack, push the release latch on
top, then slide the battery pack down.