Bfb 3D Touch, Руководство по установке и эксплуатации

Страница: 19 / 74

3D Touch
Page 19
If the model is difficult to remove from the bed in situ, you can take the whole bed out of the machine to make the removal
process easier (refer to
). b. Check the print bed is fitted correctly
Check the bed is clear of any build material
Ensure that all build material is completely removed from the bed. Use the model removal tool to remove any stuck-fast tracks.
It is normal for prints to leave marks on the bed, and for the model removal tool to lightly scratch the surface of the bed. This will
not affect the printer's operation. However, take care to avoid gouging the surface with the material removal tool – the bed must
be flat.