User Manual for Wireless VoIP Phone
- 34 -
Version1.0 2007-12-29
defaulted pin code is 0000, the new pin code should be input if the defaulted pin code 0000 is
replaced )
>> Press
to confirm, the screen display
OFF
;
press
or
button to select
ON
>> Press
button to confirm, the screen displays “
NUMBER1
”
>> Press
or
button to select the barring number ranged 4 groups (the barring number length
are restricted to 4 digits)
>> Press
button to confirm, input the desired barring number
>> Press
button to confirm, after a sound of “DiDu” tone being heard, it indicate the barring number
setting is done.
>> Press
.button to turn into standby mode
Note:
1. The barring number is to restrict the number, which its initial number is the same as the barring
number dialed. If the set barring number is “
0
”, then all number with 0 as its initial number couldn’t be
dialed out. The situation is same if the set barring number is others.
2. To delete the barring number; select the barring number and press
button to confirm, the
screen will display the barring number; press
button to delete the barring number;
press
button to confirm. A sound of “DiDu” will be heard to indicate the setting is done
△
WALKIE TALKIE SETTING
Note:
1. Walkie Talkie function is activated only with power supply available
2. Walkie Talkie is workable only based on more than one handset
On more-than-one-handset-available situation, press
button on one handset, LCD will display
