8
5. Steering Wheel
6. Digger Arm
M5 nut
Machine screw
Screwdriver
Steering wheel
Steering wheel
Rotating device
Hydraulic rod
Digging arm
Plug
Plug
Screw(M8 134)
*
Nut
Rotating device
Digging arm
•
Place the digger on a horizontal position, take the Digger arm
out from the box
•
Connect the plugs (one end from digger arm, another end from
rotating device)
•
Insert the gear box of digger arm to rotating device
•
Inert the hydraulic rod to the rabbet of rotating device
•
Take machine screw (M8*134) and nut out from accessories
package
•
Insert the machine screw inside the fixed hole position between
the digger arm and rotating device, and fasten it with the nut
•
Unscrew the machine screw from the steering wheel
handle and connect the steering wheel’s plug with the
body socket
•
Insert the handle hole of the steering wheel into the
steering shaft in a correct position (attn.: outside hole
position of steering wheel and dashboard must be in
the same direction, otherwise it will cause danger to
the wire)
•
Put the machine screw through the steering wheel’s
handle hole and tighten up.
