Beyerdynamic Unite RP, Быстрый старт

Страница: 16 / 36

Unite RP | RP-T – Bodypack Receiver
16
4. General operation
• Important: Before using the bodypack receiver for the first
time , you must charge the built-in battery. Please use an
appropriate Unite charger.
• Connect a headphone or induction loop to jack socket .
With the RP-T variant you can also connect a headset
instead of headphones.
• Hold down the on/off button to switch on the receiver.
• Use the volume button to adjust the volume of the
headphone/headset/induction loop.
• All devices are supplied with the group ID 256 and fixed
audio encryption allowing quick and easy initial use.
• If you require several device groups or an audio trans-
mission even more secure against eavesdropping, to avoid
listening by other Unite users using Unite devices, follow
the steps in chapter 5 of the Unite TP bodypack transmit-
ter quick start guide to create a new pairing.
The transmitter and receiver can only communicate if the
settings mentioned in this chapter match. Transmitters
cannot communicate with receivers that do not have the
same pairing information. This is shown in the following
diagram: