Beyerdynamic Unite CC-24P Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 36

Beyerdynamic Unite CC-24P Скачать руководство пользователя страница 13

UNITE – Charging

13

8. Charging

Before using the Unite system for the

first

time, you must

charge the batteries integrated in the Unite TP or Unite
TH transmitters and Unite RP bodypack receiver. The
charging process and relevant charge status is shown
on the status light of the transmitter/ receiver.

There are two options for charging the battery:

1. Unite charger

• Connect the charger to an easily accessible power

outlet.

• Switch the charger to the position “Charge only”

.

• Insert the transmitter/receiver into the charging com-

partment. Please ensure the device is placed into the
charging compartment in such a way as to ensure
proper contact with the charger.

• The charging process will start automatically.
• It is not possible to use the transmitter/receiver during

charging.

2. USB power adapter

• Connect a separate USB power adapter to the USB

port on the transmitter/ receiver.

• Connect the plug of the USB power adapter to a

power outlet.

• The charging process will start automatically.
• It is not possible to use the transmitter/ receiver

during charging.

• The battery’s charge status is shown on the LED indi-

cator of the relevant transmitter/receiver.
See the following table.

Charging with Unite charger

Charging with USB power adapter

USB power adapter

USB plug
type C

Display

Charging status

Off

The device is switched off

Flashing green slowly

Charging mode 0–100%

Green

Battery is charged

Flashing yellow slowly

Pairing information is being
copied from the transmitter

10 seconds yellow

Device information success-
fully copied to charger/devi-
ces

Flashing red slowly for
10 seconds

• More than one transmitter

in the charger at the start
of the pairing process

• Other pairing errors

Flashing green/yellow
rapidly

Device is being localised

Flashing red rapidly

Charging error

Pair/Reset

Status

• Pair & Charge
• Charge only

Table 3

Found on charger

«
...
11
12
13
14
15
...
»

Содержание Unite CC-24P





































Отзывы:

Нет отзывов