26
•
Thread the power cable through the cable grip as shown on the illustration below. The
cable grip prevents the connector from being pulled off by accident.
1.5
Setting up
•
Switch on the receiver . The red LED will illuminate.
•
As soon as you switch on the transmitter, the RF indicator will illuminate. When you
speak into the microphone, the AF indicator will illuminate according to the strength
of the sound level. If the LED does not illuminate or there is no sound, the system should
be checked.
•
The microphone output level has to be adjusted at the amplifier or mixer.
1.6
How to adjust the Squelch
•
If the RF indicator illuminates before the transmitter is switched on, noise will occur.
The more LEDs illuminated, the stronger the interference.
•
In this case the inteference can be suppressed with the squelch control by rotating it
clock-wise to the right.
•
Please note, adjusting the squelch can affect the sensitivity of the receiver and the
distance between transmitter and receiver antenna may need to be reduced.
1
2
3
2
10
