Beyerdynamic MCS 50, Руководство по эксплуатации

Страница: 38 / 92

38
5. Setting up
5.1 Switching on
When the system is switched on it carries out a system check checking all stored parameters.
An error message appears at a deviation.
System O.K. = the conference system is ready for operation
After the system check the default screen appears indicating the adjusted mode (Autonomy,
Override, Request-to-talk, Automatic), the signal level of the connected devices/microphone units
and the actual number of switched on microphones, including chairman microphone units.
If this error message occurs, carry out a configuration (refer to chapter 5.2 “Configuration” or
adjust the user specific parameters and configurate the corresponding parameters (refer to chapter
“5.3 Adjusting the user specific parameters”).
5.2 Configuration
You access the configuration menu when you press both buttons simultaneously of the switched on MCS 50. The arrows in the
display indicate which buttons of the device have to be pressed, left (Reset) =
▼
, right (N.o.m.) =
▲
. To exit the individual menu items
press both buttons simultaneously. You will access the main menu again or return to the operation mode. The entered data is stored
automatically.
1. Parameter
In this menu the number of connected microphones can be adjusted. Press the left button (4) to
enter the sub-menu.
Press the left button (4) or right button (5) to enter the number. It is possible to enter 32
microphone units at maximum. (As an option up to 64 microphone units.)
Reset N.o.m.
beyerdynamic
MCS 50 V.1 - Software Version (E)
Reset N.o.m.
System check please wait
Reset N.o.m.
System O.K.
Reset N.o.m.
Level
Override NOM 0
Reset N.o.m.
Wrong number of
microphone units
Reset N.o.m.
Number of mics
More
Reset N.o.m.
20
- +