Beyerdynamic Impacto Essential, Руководство пользователя, Страница: 6 / 68

Impacto essential – High-end cable DAC & Amplifier
6
Operating instructions
• Disconnect the original cables on the right and left ear cup of your headphone.
• Connect the two mini jack plugs (3.5 mm) of the headphone cable, which is attached to the Impacto
essential, to the ear cups of your headphone. Refer also to illustration 1-2.
• Connect the Impacto essential to your computer, tablet or smartphone by using the appropriate
cable. Make sure that you connect the connector indicating “DAC” to the bottom of the Impacto
essential (refer to illustration 1-3).
• The Impacto essential is ready for operation when the
w
button is illuminated.
• Set the volume of your player to maximum. After that you will control the volume on the Impacto
essential only.
• In order to protect your hearing, the
w
button flashes from a certain gain and the volume is not
increased further while pressing the + button. If you wish to increase the volume any further, release
the + button briefly (approx. 1 second) and press the + button again (as long as the
w
button still
flashes). Please also refer to the note on the European standard EN 50332 at the beginning of this
manual as well as the section “Warning / hearing protection”.
Connection and button functions
Reduce volume Increase volume
Cable to connect to the
left side of the headphone Cable to connect to the
right side of the headphone
Skip to the previous track Skip to the next track
Hi-Res LED (illuminates only
with Hi-Res audio transmission
from 48 kHz)
Play / Pause
Illustration 1-2