Beyerdynamic 717649, Руководство по эксплуатации

Страница: 10 / 84

Operation
10/14 Blue BYRD
OPERATION
Switching on and off
Switching on:
►
Press the On/Off button for 2 s.
Switching off:
►
Press the On/Off button for 4 s.
Pairing with a playback device
Before you can use the in-ear headphones for the
first time, you must pair them with your mobile phone
or another Bluetooth®-enabled device. The pairing
procedure may differ depending on the playback device.
►
Please refer to the corresponding operating
instructions of the playback device.
Establishing pairing:
9
The in-ear headphones are switched off.
1 . Press the On/Off button for 4 s.
The Bluetooth® pairing mode
starts.
The LED display flashes alternately
blue and red.
2 . Activate the Bluetooth® function on
the playback device and search
for new devices if necessary.
3 .
In the Bluetooth® menu on the
playback device, select “Blue
Byrd (2nd gen.)” from the available
devices and pair the two devices
with each other.
After a successful connection, the LED briefly flashes
blue every 7 s. Each time the unit is switched on again,
the units will connect as soon as they are within range
of each other.
If the Bluetooth® connection has been lost, the LED briefly
flashes blue every 3 s.
Deleting the list of already paired devices:
►
Press the On/Off button for longer than 10 s.
The list of already paired Bluetooth® devices
(maximum 8) is deleted, and the in-ear headphones
switch to the Bluetooth® pairing mode.
Multi-point operation
The in-ear headphones can be paired with up to
8 Bluetooth®-enabled devices. Active connections are
possible with up to two devices at a time. However,
playback of music and phone operation is only possible
with one device at a time. Phone operation has priority
over playback of music, i.e. playback of music is
interrupted during phone calls.
Priority list when using the playback devices (PD):
PRI . Profile Playback devices (PD)
1 HFP (phone operation) PD 1 (device used first)
2 HFP (phone operation) PD 2 (device used second)
3 A2DP (playback of
music)
PD 1 (device used first)
4 A2DP (playback of
music)
PD 2 (device used second)
Setting up multi point:
1 .
Connect the in-ear headphones with the first device
(see „Pairing with a playback device“ on page 10).
2 .
Deactivate the Bluetooth® connection on the first
device.
3 . Switch off the in-ear headphones.
4 . Connect the in-ear headphones with the second
device (see „Pairing with a playback device“ on
page 10).
5 .
Re-activate the Bluetooth® connection with the first
device that automatically connects to the in-ear
headphones.
Once both devices are paired with the in-ear
headphones, the in-ear headphones automatically
connect with both devices every time they are
switched on.
Using multi point:
9
You have connected the in-ear
headphones with two devices and
just activated media playback.
►
Briefly press the ( ) once, to accept
an incoming call.
9
You have connected the in-ear
headphones with two devices and
have just ended a call.
►
Briefly press the
( )
button once, to
start the media playback that was
last played.