bewello BW2026, Руководство пользователя

Страница: 5 / 28

5
Symbols
Fan
Timer function
Low performance (1000 W)
Weekly timer
High performance (2000 W)
Temperature setting
Remote
Off/On switch:
Press the button to turn on the device and the fan will start. Press repeatedly.
The device will then turn off and the fan will run for another 30 seconds.
Heating: Press the button to switch between heating modes. (low, high, fan mode)
Timer:
You can schedule the product to turn off automatically, as many times as you press the
button, increasing the remaining time by 1 hour till shut down. (1H, 2H, 3H, 4H… 8H).
Temperature setting:
Press the button and then use the + and - buttons to set the desired
temperature. (18 – 45 °C) If you set the temperature setting 3 degrees higher than the ambient
temperature, the device automatically switches to high power. To save the settings, press the “OK”
button or wait 5 seconds after the LED flashes.
Open window detection: The following function is only available during heating if the
appliance detects that the ambient temperature has dropped. It is then likely that a door has been
opened and the heating function is not effective. The device suspends the heating.
Date setting:
After switching on, press the button and then use the + and - buttons to set the current date (eg. 01-07).
Press OK to save.
Time setting:
After setting the date, the clock setting interface will automatically appear. Use the + and - buttons to set the hour
(0-23) and then the minute (0-59). Press OK to save.
Weekly timer:
You can choose from 6 setting options, P1, P2, P3, P4, P5, P6, which contain preset timings.
Mode Monday Tuesday Wednesday Thrusday Friday Saturday Sunday
P1 8:00-17:00 8:00-17:00 8:00-17:00 8:00-17:00 8:00-17:00 8:00-17:00 8:00-17:00
P2 18:00-7:00a 18:00-7:00a 18:00-7:00a 18:00-7:00a 18:00-7:00a 18:00-7:00a 18:00-7:00a
P3
8:00-17:00 8:00-17:00 8:00-17:00 8:00-17:00 8 :00-17:00 OFF OFF
P4 18:00-7:00a 18:00-7:00a 18:00-7:00a 18:00-7:00a 18:00-7:00a OFF OFF
P5 OFF OFF OFF OFF OFF 00:00-23:59 00:00-23:59
P6
Free mode Free mode Free mode Free mode Free mode Free mode Free mode
Remark P6: time setting range, 00-24H, the start time should be earlier than the end.
Clear temperature setting: Press the button, then press the button. If a high temperature was previously set,
the appliance will continue heating in high power mode, if a lower temperature was set, it will continue heating in low power mode.
Clear weakly timer:
Press the button int he settings to delete. If a high temperature was previously set, the appliance will
continue heating in high power mode, if a lower temperature was set, it will continue heating in low power mode.
Overheating protection:
If the device detects a temperature of 51 °C, it is automatically disabled.