29
Doc. No. 002 Issue 2 April 1998
User-defined short codes on/off
When the system is delivered, the system automatically
suggests a short code (starting with 0001) when programming
new telephone numbers. This means the
User-defined short codes
function is switched off. If needed, it can be switched on.
When the function is switched on an additional prompt is
displayed when new telephone numbers are programmed (see
page 26). The prompt asks which short code is to be used.
Proceed as follows:
1 Go to the
Options menu
and scroll to the
User def. short code
function (follow the initial instructions in the
Change call
duration time
section on page 27). The following text is displayed:
/ TO SCROLL
ENABLE QUICK NO PROG
2 Press
. The following text is displayed:
ENTER 1 (ON) / 0 (OFF)
(0)
3 Press 1 (this switches on the
User def. short code
function).
4 Press
. The following text is displayed again:
/ TO SCROLL
ENABLE QUICK NO PROG
5 Press
Esc
to go back to the stand-by position or scroll to
another function and continue programming.
To switch the function off, follow the above instructions, only
enter 0 in step 3.
4. PROGRAMMING
