BeWAN BWVOIP-PHS2, Руководство пользователя

Страница: 6 / 36

BeWAN VoIP Phone S2 6
4. Precautions for use
Carefully read the following safety instructions before installing or using the BeWAN VoIP
Phone S2. The usage instructions must be followed exactly.
4.1. Location
•
Avoid using, placing or storing the phone in areas which are exposed to intense light or high
temperatures, or close to sources of heat.
High temperatures can damage the phone. Maximum temperature must not exceed 40°C (104°F).
•
Avoid installing the phone in a humid or dusty area.
•
Keep the phone in a secure and stable location.
If the case is dropped, it may sustain serious damage.
•
Keep the phone out of the reach of children.
4.2. Upkeep and maintenance
•
Do not open, disassemble or modify any part of the phone.
Any disassembly or modification could result in a strong electric discharge. Internal inspections,
modifications and repairs must imperatively be carried out by accredited and qualified
technicians.
Opening the phone or any internal modification will void the warranty.
•
Before cleaning the phone, disconnect its power supply.
•
When cleaning the phone, do not use certain chemical products which could damage plastic
materials. Do not use substances containing alcohol, benzene, paint thinner or other flammable
products.
•
Do not bring the phone into contact with water or other liquids.
No liquid must get inside the phone. If the outside of the unit comes into contact with a liquid,
wipe it using a soft and absorbent cloth. If a liquid or other substance gets inside the phone,
disconnect the cables. If you continue using phone, there is the risk of a fire or electrical
discharge.
4.3. Power supply and cables
•
Only use the supplied accessories.
Using power sources other than those recommended for this hardware may cause it to overheat
or become warped, and may result in a fire or electrical discharge.
•
Make sure that the cables are laid out such that no one can trip over them or walk on them.
•
Do not run the cables through a passage or in an area where they may be pinched.
•
When disconnecting the cables, hold the solid part.
Pulling on the flexible part of the cable can damage the insulation or strip the wire, thus creating
a risk of fire or electrical discharge.
•
Immediately discontinue using the phone if any smoke is seen to come from it.